Want to make creations as awesome as this one?

Transcript

configure my Smoke/CO alarm Detection

HOW TO:

USING IOS

ON my Arlo all-in-one sensor

How to Enable/Disable Smoke/CO Alarm on my Keypad Sensor Hub

Tap Devices.

How to Enable/Disable Smoke/CO Alarm on my Keypad Sensor Hub

There are two ways to access Device Settings. 1. Tap or click the 3-dot button icon. 2. Tap or click the All-in-one Sensor Hub.

You may also access Device Setting by tapping the device card. Tap or click the Arlo All-in-One Sensor card.

How to Enable/Disable Smoke/CO Alarm on my Keypad Sensor Hub

Tap or click the Device Settings.

How to Enable/Disable Smoke/CO Alarm on my Keypad Sensor Hub

Tap or click the Settings (gear icon) on the All-in-One Sensor card.

How to Enable/Disable Smoke/CO Alarm on my Keypad Sensor Hub

Tap or click Smoke / CO Alarm.

How to Enable/Disable Smoke/CO Alarm on my Keypad Sensor Hub

Slide the toggle for Enable Detection to the right (on) or left (off). Tap or click Enable Detection.

How to Enable/Disable Smoke/CO Alarm on my Keypad Sensor Hub

Place your Sensor within 5.9 feet (1.8 m) of the Smoke or CO alarm that you want to detect. Note: Make sure your alarm follows national standards for T3 or T4 beep patterns and tap Continue. Tap Continue.

Click Learn More for more information.

How to Enable/Disable Smoke/CO Alarm on my Keypad Sensor Hub

Click this to access the article.

Click Back to go to the previous page.

How to Enable/Disable Smoke/CO Alarm on my Keypad Sensor Hub

Place your Sensor within 5.9 feet (1.8 m) of the Smoke or CO alarm that you want to detect. Note: Make sure your alarm follows national standards for T3 or T4 beep patterns and tap Continue. Tap Continue.

How to Enable/Disable Smoke/CO Alarm on my Keypad Sensor Hub

Place your Sensor within 5.9 feet (1.8 m) of the Smoke or CO alarm that you want to detect. Note: Make sure your alarm follows national standards for T3 or T4 beep patterns and tap Continue. Tap Continue.

Click to simulate a test beep when the test button on a Smoke/CO Detector is pressed. Note: If the sensor detects no sound, No Smoke/CO Alarm Detected will appear. If the sensor detects sound, Smoke/CO Alarm Detected will appear.

Tap Finish.

How to Enable/Disable Smoke/CO Alarm on my Keypad Sensor Hub

Smoke/CO Detection on your Arlo All-in-One Sensor is now enabled. Slide the toggle for Enable Detection to the left to disable it.

How to Enable/Disable Smoke/CO Alarm on my Keypad Sensor Hub

You have now learned how to enable or disable Smoke/CO Detection on your Arlo All-in-One Sensor. For more information, visit this link.