IOS: HOW TO NAVIGATE DEVICE SETTINGS

HOW TO:

NAVIGATEDEVICE SETTINGS USING

IOS

How To Add A Device Using iOS

Click on "Devices" tab

How To Add A Device Using iOS

To start navigating the settings, click on the 3-dot button.

How To Navigate Device Setting Using iOS

Click on the settings icon to start

How To Navigate Device Setting Using iOS

This allows you to change your device's name, customize your indicator LED, see your device's Location, see if there's a firmware update, and take a look at your hardware model and serial number.

You can turn your device on and off by toggling this button.

This is your device's battery percentage. This allows you to determine if you have to charge the battery already.

This is where your device is connected; it can be connected directly to a Wi-Fi network or an Arlo Base Station or Arlo SmartHub.

This allows you to optimize your device's battery life and video quality. It has 3 options: Best Video - may reduce battery life Optimized - balances video quality and battery life Best Battery Life - may reduce video quality

This allows you to customize your device's Field of View, enable Local 2k Live Streaming, rotate the video to 180 degrees, enable Auto HDR, adjust video brightness, turn on Auto Zoom &Tracking, and modify Flicker Adjustment. Note: To be able to have the Local 2k Live Streaming option, Pro 4 has to be connected to a Smarthub. For more information, go to this link

This allows you to turn the Night Vision on and off; it has 2 modes - Black & White and Color.

You may enable and disable the Spotlight here, adjust its brightness from 1-100%, and change its behavior to Constant, Flash, or Pulsate.

This allows you to enable and disable the microphone and speaker, and adjust its volume from low to high.

This allows you to highlight areas in your camera's view where you want to receive motion alerts.

Default Mode Settings is where you can adjust the motion detection sensitivity and audio detection level, choose the length of the recordings when motion/audio is detected, customize the siren length, and adjust the siren volume.

This allows you to chat with a bot, speak with a support expert, join community discussions, and call the Arlo Support hotline. Note: Chat with a support expert and calling the hotline through the app is only allowed to users with subscriptions.

Click to customize another device.

How To Navigate Device Setting Using iOS

Click on the settings icon to start

How To Navigate Device Setting Using iOS

This allows you to change your device's name, customize your indicator LED, see your device's Location, see if there's a firmware update, and take a look at your hardware model and serial number.

You can turn your device on and off by toggling this button.

This is your device's battery percentage. This allows you to determine if you have to charge the battery already.

This is where your device is connected; you need a Base Station or Arlo SmartHub to connect it to Wi-Fi.

This allows you to customize your device's Field of View, enable Local 2k live streaming feature, rotate the video to 180 degrees, enable Auto HDR, adjust video brightness, turn on Auto Zoom &Tracking, and modify Flicker Adjustment. Click on "Video Settings" to customize the Local 2k Live Streaming feature of Pro 3

How To Navigate Device Setting Using iOS

Local 2k live Streaming is an additional feature of Arlo Pro 3. This allows you to stream live video in 2K mode. Note: This is only available when your device is connected to your home network. And only two cameras can stream higher-quality live video simultaneously. Click to enable.

Click the back button to customize another setting.

How To Navigate Device Setting Using iOS

This allows you to turn the Night Vision on and off; it has 2 modes - Black & White and Color.

You may enable and disable the Spotlight here, adjust its brightness from 1-100%, and change its behavior to Constant, Flash, or Pulsate.

This allows you to enable and disable the microphone and speaker, and adjust its volume from low to high.

This allows you to highlight areas in your camera's view where you want to receive motion alerts.

Click to customize another device.

How To Navigate Device Setting Using iOS

Click on the settings icon to start

How To Navigate Device Setting Using iOS

This allows you to change your device's name, customize your indicator LED, see your device's Location, see if there's a firmware update, and take a look at your hardware model and serial number.

You can turn your device on and off by toggling this button.

This is your device's battery percentage. This allows you to determine if you have to charge the battery already.

This is where your device is connected; it can be connected directly to a Wi-Fi network or an Arlo Base Station or Arlo SmartHub.

This allows you to customize your device's Field of View, enable Local 4k live streaming feature, rotate the video to 180 degrees, enable Auto HDR, adjust video brightness, turn on Auto Zoom &Tracking, and modify Flicker Adjustment. Click on "Video Settings" to customize the Local 4k Live Streaming feature of Ultra 2.

How To Navigate Device Setting Using iOS

Local 4k live Streaming is an additional feature of Arlo Ultra 2. This allows you to stream live video in 4K resolution. Note: This is only available when your device is connected to your home network. And only two cameras can stream higher-quality live video simultaneously. Click to enable.

Click to customize another device.

Click the back button to customize another setting.

How To Navigate Device Setting Using iOS

This allows you to turn the Night Vision on and off; it has 2 modes - Black & White and Color.

You may enable and disable the Spotlight here, adjust its brightness from 1-100%, and change its behavior to Constant, Flash, or Pulsate.

This allows you to enable and disable the microphone and speaker, and adjust its volume from low to high.

This allows you to highlight areas in your camera's view where you want to receive motion alerts.

Click to customize another device.

How To Navigate Device Setting Using iOS

Click on the settings icon to start

How To Navigate Device Setting Using iOS

This allows you to change your device's name, see your device's Location, connect to HomeKit, see if there's a firmware update, and take a look at your hardware model and serial number.

This allows you to record your videos locally. Click on "Storage Settings" to navigate.

These are the devices connected to your SmartHub

How To Navigate Device Setting Using iOS

You'll need to have a USB device inserted into your device to be able to record clips locally.

Click to customize another device.

How To Navigate Device Setting Using iOS

Click on the settings icon to start

How To Navigate Device Setting Using iOS

This is where your device is connected; it can be connected directly to a Wi-Fi network.

Chime Melody can be changed through your Arlo Video Doorbell Chime settings. You may click this link to learn more.

This allows you to chat with a bot, speak with a support expert, join community discussions, and call the Arlo Support hotline. Note: Chatting with a support expert and calling the hotline through the app is only allowed to users with subscriptions.

This allows you to change your device's name, see your device's Location, see if there's a firmware update, and take a look at your hardware model and serial number.

Video doorbells that are paired to your Chime are shown here. Click the trash bin icon to delete, and click "Add Doorbell" to add another doorbell.

Click to customize another device.

How To Navigate Device Setting Using iOS

Click on the settings icon to start

How To Navigate Device Setting Using iOS

This is your device's battery percentage. This allows you to determine if you have to charge the battery already.

This is where your device is connected; it can be connected directly to a Wi-Fi network or an Arlo Base Station or Arlo SmartHub.

This allows you to change the video resolution, enable Auto HDR, adjust the video brightness, and modify Flicker Adjustment.

This allows you to change your device's name, see your device's Location, see if there's a firmware update, and take a look at your hardware model and serial number.

This allows you to turn the Night Vision on and off.

This allows you to enable and disable the microphone and speaker, and adjust its volume from low to high.

This allows you to highlight areas in your camera's view where you want to receive motion alerts.

Default Mode Settings is where you can adjust the motion detection sensitivity, choose the length of the recordings when motion/audio is detected, customize the siren length, and adjust the siren volume.

Click to swipe up for other settings

How To Navigate Device Setting Using iOS

This allows you to enable or disable Silent Mode. When enabled, incoming calls and chimes connected to the Arlo Doorbell are turned off.

This allows you to turn on and off the indicator LED when motion is detected and when a call is accepted. When a visitor rings the doorbell, the LED turns on. Whereas when motion is detected the LED illuminates in a breathing pattern.

This allows you to customize call settings of your phone when you accept a doorbell call, and allow the visitor to leave a message if a doorbell call is not accepted in 20 seconds.

This allows you to choose among 12 melodies and adjust the chime's volume.

Here, you may choose the language of your choice.

Chimes that are connected to your doorbell are shown here. Delete by tapping the trash bin icon or add by clicking the "Add Chime" button.

Click to customize another device.

How To Navigate Device Setting Using iOS

Click on the settings icon to start

How To Navigate Device Setting Using iOS

You can turn your device on and off by toggling this button.

This is your device's battery percentage. This allows you to determine if you have to charge the battery already.

A step-by-step procedure is provided here to insert a sim card and SD card into your device.

This allows you to change your device's name, customize indicator LED, see your device's location, see if there's a firmware update, and take a look at your hardware model and serial number. You can also see your LTE information such as the application firmware, modem firmware, and system version. Removing your device can also be done here.

This is where your device is connected; it can be connected directly to a Wi-Fi network.

This feature allows you to locate your device using GPS.

This allows you to see notifications such as prompts to connect to the LTE network.

How To Navigate Device Setting Using iOS

Toggling this on will start to locate your device.

Click the back button to go to other settings.

How To Navigate Device Setting Using iOS

This allows you to rotate the video to 180 degrees, adjust video brightness, and modify Flicker Adjustment.

This allows you to turn the Night Vision on and off; it has 2 modes - Black & White and Color.

You may enable and disable the Spotlight here, adjust its brightness from 1-100%, and change its behavior to Constant, Flash, or Pulsate.

This allows you to record your videos locally. Click on "Storage Settings" to navigate.

This allows you to enable and disable the microphone and speaker, and adjust its volume from low to high.

This allows you to highlight areas in your camera's view where you want to receive motion alerts.

How To Navigate Device Setting Using iOS

You'll need to have a USB device inserted into your device to be able to record clips locally.

Click to customize another device.

How To Navigate Device Setting Using iOS

Click on the settings icon to start

How To Navigate Device Setting Using iOS

You can turn your device on and off by toggling this button.

This is where your device is connected; it can be connected directly to a Wi-Fi network or an Arlo Base Station or Arlo SmartHub.

This allows you to change the video resolution between 1080p, 720p, and 480p. You may also rotate the video to 180 degrees, adjust video brightness, and modify Flicker Adjustment.

This allows you to change your device's name, customize indicator LED, see your device's location, see if there's a firmware update, and take a look at your hardware model and serial number. If you want to restart or delete your device, it can also be done here.

This allows you to turn the Night Vision on and off.

This allows you to enable and disable the microphone and speaker, and adjust its volume from low to high.

This allows you to highlight areas in your camera's view where you want to receive motion alerts.

Click to customize another device.

How To Navigate Device Setting Using iOS

Click on the settings icon to start

How To Navigate Device Setting Using iOS

You can turn your device on and off by toggling this button.

This is where your device is connected; it can be connected directly to a Wi-Fi network or an Arlo Base Station or Arlo SmartHub.

This is where your device is connected; it can be connected directly to a Wi-Fi network.

This allows you to change your device's name, customize indicator LED, see your device's location, see if there's a firmware update, and take a look at your hardware model and serial number. It also lets you connect your device to a HomeKit and use voice commands. Whenever you want to restart and remove your device, they can also be done here.

This allows you to customize your device's Field of View, enableAuto Livestreaming, change video resolution, rotate the video to 180 degrees, adjust video brightness, and modify Flicker Adjustment. Click "Video Settings" to customize Auto LIvestreaming.

How To Navigate Device Setting Using iOS

You may turn on and off Auto Livestreaming here. You have the option to connect it via mobile data & Wi-Fi or on Wi-Fi only.

How To Navigate Device Setting Using iOS

This allows you to turn the Night Vision on and off.

Sensor Settings measures temperature, humidity, and air quality. It alerts you when changes are detected. Click "Sensor Settings"

This allows you to enable and disable the microphone and speaker, and adjust its volume from low to high.

This allows you to highlight areas in your camera's view where you want to receive motion alerts.

How To Navigate Device Setting Using iOS

This is a special feature that you can only find in Arlo Baby. It alerts the parents when changes are detected in the baby's room.

Click to customize another device.

How To Navigate Device Setting Using iOS

Click on the settings icon to start

How To Navigate Device Setting Using iOS

You can turn your device on and off by toggling this button.

This is where your device is connected; it can be connected directly to a Wi-Fi network.

This allows you to change the video resolution between 1080p, 720p, 480, 360p, and 240p. You may also rotate the video to 180 degrees, adjust video brightness, and modify Flicker Adjustment.

This allows you to change your device's name, customize indicator LED, see your device's location, see if there's a firmware update, and take a look at your hardware model and serial number. If you want to restart or delete your device, it can also be done here.

This allows you to turn the Night Vision on and off.

This allows you to record your videos locally.

This allows you to highlight areas in your camera's view where you want to receive motion alerts.

This allows you to enable and disable the microphone and speaker, and adjust its volume from low to high.

IOS: HOW TO NAVIGATE DEVICE SETTINGS

More creations to inspire you

SLYCE DECK

LET’S GO TO LONDON!

ENERGY KEY ACHIEVEMENTS

HUMAN AND SOCIAL DEVELOPMENT KEY

CULTURAL HERITAGE AND ART KEY ACHIEVEMENTS

DOWNFALLL OF ARAB RULE IN AL-ANDALUS

ABOUT THE EEA GRANTS AND NORWAY

Transcript